Banstand.com FAQ's - Instructions

751 23^rd Avenue
San Francisco, CA 94121

BANSTAND™

(415) 752-8355

Q and A
FAQ's
Assembly Instructions

Buy BANSTAND™

Protection

Company Information

Contact BANSTAND

BANSTAND home page

Assembly Instructions are included in a single page of instructions in each shipment of the BANSTAND. An image of the instruction sheet is available through the "full image" section of our web site at http://banstand.com/fi/. You can also go directly to the complete image.

We've broken the instruction sheet into three sections for those with slower connections. Follow along in our series if you don't want to load the larger images.

The fully assembled BANSTAND.

Before opening your BANSTAND make sure you let it come to room temperature. Banstand is flexible, and will maintain power in springs and hinges when flexed flat (180 degrees). The book/copy ledge only needs to be flexed over the locking tabs - overbending may cause it to lose spring over time. Most importantly, if you ever have a problem, remember our guarantee.

To Disassemble: Hold your stand with the legs up, bend the ledge slightly until the tabs disengage then rotate the legs back into the flat position. Bend the ledge back up into the flat position and close the stand with the legs inside.